Shop Online

Supplies & Equipment for Industrial Use Only

  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    #87 Degreaser Solution

    $38.00$339.00
    The #87 Degreaser Solution is a highly concentrated liquid cleaner and degreaser used for cleaning glass and plastic surfaces. It has been shown to remove hard to remove oils, organic residues, and fingerprints from a variety of ceramic, and plastic surfaces.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    #500 Retarding Thinner

    $37.00$323.00
    The #500 Retarding Thinner is a Glycol Ether solvent added to a paint mix to retard its drying time in hot weather applications. It should be used to extend flow time and prevent solvent blush when working in high temperatures or high relative dew points. This will make Permalac/lacquer take around an hour to set up. It can also be used as a cleaner for finishing metals. Use between 5% and 10%. Use when humidity exceeds 85%.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    #69 Warm Weather Thinner

    $33.00$302.00
    #69 Thinner is a medium speed lacquer thinner. Use when the ambient temperature is 66°F to 85°F. When spraying, thin 20%. If the Permalac is drying too quickly, and you notice blush or any other adverse effects, you can increase this to 30%. When brushing, thin 10%.

  • Sodium Hydroxide Pellets (5 Pound Bag)
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Copper Powder

    $50.00$275.00
    Peacock Copper Powder is a specially prepared powder made from copper metal. Use with Copper Tite Vehicle #3 in the Peacock non-electrolytic copper mirror backing process. Recommended mix: 6 pounds Copper Powder to 4 gallons Copper Tite Vehicle #3.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Red Rouge

    $13.00$246.00
    Peacock Red Rouge is a very fine grade of iron oxide rouge used for block polishing and cleaning of glass. Use prior to silvering. Degreasing and polishing may be combined in one step by adding #87 cleaner to the red rouge slurry before polishing.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    The #281 Standard & Mirror Backing Thinner is a specially-refined form of xylene for use with the Copper Tite Vehicle #3, Permalac products, and other standard backing paints. Use when the ambient temperature is 50°F to 65°F. Thin Pemalac Original, EF 20% when spraying. No thinner will be needed for brushing unless you notice brush strokes or irregularities.

  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    The #175 Mirror Backing Paint is a resilient, dark gray to black, unleaded, air-dried paint used to add an extra layer as a tough top coat over the Copper Tite Vehicle #3 (with or without copper powder). This paint cannot be applied directly to silver. Apply with the usual methods of brush, spray, roller or curtain coating. This semi-gloss paint is a high solids paste and is economical to use. May be thinned with #178 Mirror-Backing Thinner. Use a thinning ratio of between 2:1 to 1:1 paint paste to thinner. Approximate coverage is 650 Square feet per gallon.
  • The PChrome Tints Pack contains 4 oz bottles of each of the follow tints: gold, copper, red, black, and blue. These tints are colorfast, will not fade, and can be mixed to make custom colors. Tints can be mixed between 1:15 (tint to lacquer) and 1:30 ratios to yield the best results.
  • The sensitizer spray gun repair kit contains parts used to repair Sensitizer Spray Gun models. It contains the following parts:
    Standard U-0 - U-0 Fluid Tips 1 ea Sale
    Standard U-203 - U-203 Packing Glands 1 ea Sale
    Standard U-2500 - U 2500 Springs 1 ea Sale
    Standard U-30 - U- 30 Springs 1 ea Sale
    Standard U-29 - U-29 Packing Glands 1 ea Sale
    Standard U-33 Springs - U-33 Springs 1 ea Sale
    Standard U-28-12 - U-28- 12 Packing Washers (per Dozen) 1 ea Sale
    Standard U-31Spring Seats - U-31 Spring Seats 1 ea Sale
     
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    The #178 Mirror Backing Thinner is a mineral spirits blend to be used with #175 Mirror Backing Paint for reduction and clean up.

  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Peacock RTA-550 is a super concentrated tin-acid solution. Recommended for automated conveyorized systems and for hand sprayers. Dilute 1.5 ml to one gallon with deionized water. Shelf life > 1 year.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Iron Powder

    $75.00$123.00
    Iron Powder for use with mirror backing and/or copper plating prior to mirror backing.
  • Hydrochloric Acid (37% Reagent-Grade): When used for stripping silver, hydrochloric acid forms a water-insoluble white precipitate that is easily removed from waste water. Proper ventilation is required by the user to handle the corrosive fumes associated with hydrochloric acid.
  • Nitric Acid is used for dissolving silver from glass for re-silvering and titration. Proper ventilation is necessary to tackle the acid fumes when using this product.
  • Plastic quart siphon bottle assembly with fittings that connect it to the fluid inlets of our spray guns. Stainless steel parts for spraying corrosive liquids.
  • Out of stock
    The #390 Gray Mirror Backing Paint is specially formulated to serve as a protective coating on silver for decorative applications. This high-solids (more than 60%), lead-free coating can be applied directly on silver or on top of copper to provide superior protection for silver from corrosion. The paint can be applied using brush, spray, roller, or curtain coating. May be thinned with a variety of solvents (#281, #178 or xylene) to meet stringent air quality standards. Use a thinning ratio of between 2:1 and 1:1 paint to thinner. Approximate coverage is 500 square feet per gallon.  
  • Methanol Solution
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Deionized Water

    $15.00$60.00
    Deionized water for use in dilutions for silvering and related chemical processes. When possible, deionized water should be used when silvering.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Graduated Cups

    $3.00$6.00
  • 3 mL Plastic Pipettes (Pack of 10)
Go to Top